Thomson elite stem

Overview Produk

• All Thomson Stems can be flipped and run opposite their stated rise (upside down) giving you more fit options.
• The Thomson stem is machined from 7000 series aluminum. The stem is one-piece design with no welds or joints.
• The wide clamp length (48mm) and the patent pending undercut around the handlebar combine to grip the handlebar more securely. Thomson's "two clamps in one" design provides a stiff ride with minimal flexing or squeaking.
• The stem is designed to be very knee friendly. The rear of the stem has no lumps, grooves, or exposed bolts to hit your knee on.
• The steerer tube clamps pamper your steerer tube. The clamps have a large surface area and go around the steerer tube more than 180°. The two bolts provide an extra level of security.
• The Thomson stem has passed extensive life and ultimate strength tests.
• We have an on going testing program to insure that every production lot of our stems meets Thomson standards.
• The center tubular section of the Thomson stem is tapered with a constant wall thickness resulting in a high stiffness to weight ratio. The torsional rigidity of the Thomson stem is over 155 foot pounds per degree, the highest of any stem we have tested.
• The bolts are custom-made from high strength steel. A corrosion-preventative plating is added to prevent rust. All six bolts are interchangeable. A 4mm hex wrench will fit all bolts on our stems and seatposts.

Produk kami yang lain

- Merida Mission 2000 D (frame only)

- Merida TFS Trail 850 (Frame Only)

- Marida TFS Trail 550 (frame only)

- Merida TFS Trail 350 (Frame only)